Gateway » CX Series » CX2610

Gateway » CX Series » CX2610 LCD Screen Replacement Guide

How to Remove Replace Install your Gateway CX Series CX2610 Laptop LCD Screen

1. Remove the rubber covers from you Gateway CX2610 LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway CX2610 Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway CX2610 LCD hinges with care as they are delicate.

6. Place the Gateway CX2610 LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway CX2610 Inverter from the LCD.

8. You are now ready to replace and install your new Gateway CX2610 LCD Screen.

9. Recconnect back your Gateway CX2610 Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.